What’s new in the GNSS Firmware 5.09?
- Fixed an issue where the receiver would crash after applying a firmware update
R1 GNSS Receiver website – Technical Support
GNSS Status APP and GNSS Firmware available here
Download the GNSS Firmware 5.09 here – The download will start immediately to your PC.
- Plug the USB cable into your PC and into the R1
- Run the GNSS Firmware 5.09 exe that you downloaded
- Double click on “Trimble_R1_GNSS Receiver_Firmware_v5.09 exe” and then click Yes. If it doesn’t start-up then try again and right-click on “Trimble_R1_GNSS Receiver_Firmware_v5.09” and run as Administrator.
- Select the unit from the drop down list (it should be auto-detected).
- The upgrade will take around 5 minutes and you will see both purple and blue lights blinking on the R1 faceplate.
- Once you see the message that the firmware upgrade was applied successfully – then click Finish.
- *If your PC doesn’t find the “Device Driver” for R1 automatically then follow this steps: Verify that your computer has the latest updates and USB Drivers. Consult with your IT Staff if they need to download the latest “USB Drivers”. If none of the previous trouble-shooting steps work then go to this website CDM v2.12.00 WHQL Certified to resolve USB connection issues with your PC and the R1. Scroll down on this website and find and download the driver that matches your Operating System and Processor for your computer.
I have been unable to get the new 5.09 firmware to work. I have tried on both Windows 10 and Windows 7 PC’s, but neither system will detect that the R1 is connected via USB cable. Have you run into this issue? I have also already tried the CDM driver listed above, and it still wouldn’t detect it.
Upon attempt to upgrade firmware, i received this error: trimble R1 firmware upgrade failed to obtain device configuration
Please advise.
Hello Geri – we encourage you to contact your local Trimble Dealer in Colorado for technical support. Frontier Precision https://frontierprecision.com/contact-us/